How do drilling aids help drilling?

Drilling Aid is usually injected during cementing and other processes to prevent problems such as well wall collapse. If the drilling additive used is not good enough or is too thin, a series of hidden dangers will occur: the mud skin is too thin or easily brittle, unable to effectively protect the hole wall, and may even cause collapse, drill pinching and other incidents. The suspension force of drilling additives is insufficient. When drilling or oil pumping is carried out, a large amount of rock powder will quickly sink to the bottom of the hole, congesting and burying the drilling; the density of drilling additives is insufficient, causing blowouts, oil leaks, gas leaks and other phenomena.

Drilling additives are a basic construction material, and even small quality problems may cause considerable disasters. If you add a little drilling aid thickener when mixing drilling aids, the effect of the drilling aids will be greatly improved. Thickener for drilling additives is an additive widely used in oil drilling. By adding a small amount, it can increase the viscosity and consistency of the drilling additive, keeping the drilling additive in a dispersed but stable state, making it easy to plug leaks and make flushing more convenient.

In high-temperature environments, it can maintain stable performance without problems such as fission and looseness. It can also improve the suspension force of drilling additives, so that rock powder no longer sinks to the bottom immediately, and buried drilling accidents are also reduced. Using good drilling additives for drilling can also reduce the use of casing, thus saving a lot of steel and reducing drilling costs. However, not all drilling additives need to be thickened. Please decide to increase the consistency or dilute it according to different formation properties.

If the drilling additive used is not good enough or is too thin, a series of hidden dangers will arise: the mud skin is too thin or easily brittle, and cannot effectively protect the hole wall, and may even cause accidents such as collapse and drill pinching. The suspension force of drilling additives is insufficient. When drilling or oil pumping is stopped, a large amount of rock powder will quickly sink to the bottom of the hole and block the buried drilling. Insufficient density of drilling additives can cause blowouts, oil leaks, gas leaks, etc. Drilling additives are a basic construction material. A small quality problem may cause a huge disaster.